BCM QS750 User Manual download pdf (Page 47)

4. BIOS Setup

4.8 PnP/PCI Configuration Setup Menu

Pnp/PCI Configuration

Move to items

Enter Sub-

Modify values

PnP OS Installed

Reset Configuration Data

Resources Controlled By

IRQ Resources

DMA Resources

PCI/VGA Palette Snoop

PCI Latency Timer (CLK)

Disabled

Auto (ESCD)

Press Enter

Disabled

Item Help

Menu Level

Select Yes if you are

using a Plug and Play

capable operating system.

Select No if you need the

BIOS to configure non-

boot devices.

Exit to Main

¡ô¡õ¡÷¡ö:Move Enter: Select +/-/PU/PD/ : Modify F10:Save Esc: Exit F1:

General Help

F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults

Figure 7: PNP/PCI Configuration Setup Menu

4.8.1 PNP OS Installed

This item allows you to determine install PnP OS or not.

The choices are: Yes and No

4.8.2 Reset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended System

Configuration Date (ESCD) when you exit Setup if you have installed a new add-on and the

system reconfiguration has caused such a serious conflict that the operating system cannot

boot.

4.8.3 Resources Controlled By

The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play-

compatible devices. If you select Auto, all the interrupt request (IRQ) and DMA assignment

fields disappear, as the BIOS automatically assign them.

4.8.4 PCI/VGA Palette Snoop

Some display cards that are not standard VGA card such as graphics accelerators or MPEG

cards may not show the correct colors. This setting can correct this problem once you set it to

enable. To default setting, leaves at Disabled.

1 2 ... 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments

BCM QS750 User Manual Page 47

Comments to this Manuals

Related products and manuals for Motherboards BCM QS750