BCM QS750 User Manual download pdf (Page 4)

Easy Installation

Easy Installation Steps

The following “Easy Installation” steps are for users accustomed

to the assembly of a computer system. For those individuals

requiring more specific information, please refer to the more

detailed descriptions located within the latter chapters of this

manual. Note: You must keep your power cable unplugged until

the following installation steps are completed.

Getting Start:

Touch a grounded metal surface to release static electricity

stored in your body before unpacking your motherboard. For

details please refer to Precaution section in Chapter 3.

Install the CPU by correctly aligning the CPU with the Slot as

noted in the motherboard diagram. Once aligned, press down on

the CPU gently but firmly and lock it. Next, install the 3.3 volt

unbuffered SDRAM into the 168 pin

DIMMs. See Sec. 3.4.

Set CPU speed in according to Sec.3.2.

After completing the above steps, install any expansion

Cards( PCI, ISA) into riser card and have the riser card installed

firmly into the slot for riser card on board. See Sec. 3.5.

Plug in all cables included in the package except for the power

cord. Please see Sec. 3.6.

Please recheck all steps to ensure no mistakes have been made

and then plug in the power cord and turn on the power to enter

the BIOS setup, Chapter 4.

Release

Static Electricity

Insert CPU &

RAM

Install All

Expansion Slots

Set Jumpers of

CPU

Couple

Connectors of

HDD, FDD,...

1 2 3 4 5 6 7 8 9 ... 49 50

No comments

BCM QS750 User Manual Page 4