BCM QS750 User Manual download pdf (Page 11)

2. Features

2.1 Features Of The Motherboard

The QS750 motherboard integrates the AMD Athlon

microprocessor, memory, I/O and AGP, and is designed to fit

into a ATX form factor chassis. Page 14 illustrates the Layout

for the QS750 motherboard. Below lists the key features

provided by this motherboard:

Processor

Ø Single Slot-A for Intel AMD Athlon Processor.

Ø AMD Athlon CPU with built-in 128K L1 Cache & 512K L2 Cache.

Ø Support AMD Athlon processor speeds

Chipset

Ø AMD 751/756 AGP/PCI/ISA Chipset, supports 200MHz FSB

Ø Winbond 83977 ATF Super I/O Controller

System Memory

Ø Three 168-pin DIMM sockets

Ø Minimum 16MB up to maximum 768MB Memory Capacity

Ø Support 100MHz SDRAM DIMM module

PCI Bus Master IDE Controller

Ø Integrated PCI Bus Master IDE Controller Chip with Ultra-DMA66 capabilities. Up to

four IDE devices can be supported using the two onboard IDE connectors. Also

supported is PIO Modes 3&4, Bus Master IDE DMA Mode 2 and Enhanced IDE

devices such as Tape Backup machines and CD-ROMs. Either the 5.25-inch or 3.5

inch (1.44MB or 2.88MB) floppy drives can be used without requiring an external

card. Additionally, Floppy 3 mode (Japanese standard 3.5 inch disk drive, 1.2MB) and

LS-120 floppy disk drives (3.5 inch disk drive: 120MB, 1.44MB, 720K) are also

supported.

Integrated I/O

Ø 1 Floppy Port (up to 2.88 MB)

Ø 1 Parallel Port (ECP/EPP)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

No comments

BCM QS750 User Manual Page 11