BCM QS440VA User Manual download pdf (Page 50)

4. BIOS SETUP

4.6.3 PM Control by APM

If Advanced Power Management (APM) is installed on your system, selecting Yes gives

better power savings.

4.6.4 Video Off Option

When enabled, this feature allows the VGA adapter to operate in a power saving mode.

Always On Monitor will remain on during power saving modes.

Suspend à Off Monitor blanked when the systems enters the Suspend mode.

Susp, Stby à

Off

Monitor blanked when the system enters either Suspend or Standby

modes.

All Modes à

Off

Monitor blanked when the system enter any power saving mode.

4.6.5 Video Off Method

Determines the manner in which the monitor is blanked.

V/H

SYNC+Blank

System turns off vertical and horizontal synchronization ports and

writes blanks to the video buffer.

DPMS Support Select this option if your monitor supports the Display Power

Management Signaling (DPMS) standard of the Video Electronics

Standards Association (VESA). Use the software supplied for your

video subsystem to select video power management values.

Blank Screen System only writes blanks to the video buffer.

4.6.6 MODEM Use IRQ

Name the interrupt request (IRQ) line assigned to the modem (if any) on your system.

Activity of the selected IRQ always awakens the system.

4.6.7 Soft-Off by PWRBTN

When this feature set to “Delay 4 sec.” , the system will become suspend once the

Power Switch be pressed within 4 second, and the system will Power Off once the

Power Switch be pressed over 4 second. If it set to “Instant Off”, the system will

unconditional Power Off once the Power Switch be pressed.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 58 59

No comments

BCM QS440VA User Manual Page 50